Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

991

992

993

994

995

996

997

998

999

1000

Parameters

maximum limit Enter the keyword maximum then the hop limit value. The range is from 0 to 254.

minimum limit Enter the keyword minimum then the hop limit value. The range is from 0 to 254.

Defaults none

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

Related Commands

• ipv6 nd ra-guard enable—Allows you to congure the RA guard related commands.

• ipv6 nd raguard policy policy-name — Denes the RA guard policy name and enter the RA guard policy

conguration mode.

ipv6 nd ra-guard attach-policy

Apply the IPv6 RA guard to a specic interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2, vlan

3.....]]

Parameters

policy policy-name Enter the keyword policy then the policy name. The policy-name allows a

maximum of 140 characters.

vlan [vlan 1, vlan 2,

vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.