Reference Guide

Parameters
• process-id — (Optional) Enter OSPFv2 Process ID to view information specic to the ID.
• IP-prefix — (Optional) Specify an IP address to view information specic to the IP address.
Default None
Command Mode EXEC
Usage Information Displays the cost metric for each neighbor and interfaces.
Example
OS10# show ip ospf 10 routes
Prefix Cost Nexthop Interface Area Type
110.1.1.0 1 0.0.0.0 vlan3050 0.0.0.0
intra-area
111.1.1.0 1 0.0.0.0 vlan3051 0.0.0.0
intra-area
111.2.1.0 1 0.0.0.0 vlan3053 0.0.0.0
intra-area
Supported Releases 10.2.0E or later
show ip ospf statistics
Displays OSPF trac statistics.
Syntax
• show ip ospf [instance-number] statistics [interface interface]
Parameters
• instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
• interface interface — (Optional) Enter the interface information:
– ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
– port-channel number — Enter the port-channel interface number (1 to 128).
– vlan vlan-id — Enter the VLAN ID number (1 to 4093).
Default Not congured
Command Mode EXEC
Usage Information This command displays OSPFv2 trac statistics for a specied instance or interface, or for all OSPFv2 instances
and interfaces.
Example
OS10# show ip ospf 10 statistics
Interface vlan3050
Receive Statistics
rx-invalid 0 rx-invalid-bytes 0
rx-hello 0 rx-hello-bytes 0
rx-db-des 0 rx-db-des-bytes 0
rx-ls-req 0 rx-ls-req-bytes 0
rx-ls-upd 0 rx-ls-upd-bytes 0
rx-ls-ack 0 rx-ls-ack-bytes 0
Transmit Statistics
tx-failed 0 tx-failed-bytes 0
tx-hello 0 tx-hello-bytes 0
tx-db-des 0 tx-db-des-bytes 0
tx-ls-req 0 tx-ls-req-bytes 0
tx-ls-upd 0 tx-ls-upd-bytes 0
tx-ls-ack 0 tx-ls-ack-bytes 0
Error packets (Receive statistics)
bad-src 0 dupe-id 0 hello-err 0
mtu-mismatch 0 nbr-ignored 0 wrong-proto 0
434 Layer 3