Reference Guide

Command Mode ROUTER-OSPF
Usage Information The no version of this command deletes a stub area.
Example
OS10(config)# router ospf 10
OS10(conf-router-ospf-10)# area 10.10.1.5 stub
Supported Releases 10.2.0E or later
auto-cost reference-bandwidth
Calculates default metrics for the interface based on the congured auto-cost reference bandwidth value.
Syntax
auto-cost reference-bandwidth value
Parameters value — Enter the reference bandwidth value to calculate the OSPF interface cost in megabits per second (1 to
4294967).
Default 100000
Command Mode ROUTER-OSPF
Usage Information The value set by the ip ospf cost command in INTERFACE mode overrides the cost resulting from the
auto-cost command. The no version of this command resets the value to the default.
Example
OS10(config)# router ospf 10
OS10(conf-router-ospf-10)# auto-cost reference-bandwidth 150
Supported Releases 10.2.0E or later
clear ip ospf process
Clears all OSPF routing tables.
Syntax
clear ip ospf {instance-number} process
Parameters instance-number — Enter an OSPF instance number (1 to 65535).
Default Not congured
Command Mode EXEC
Usage Information This command clears all entries in the OSPF routing table.
Example
OS10# clear ip ospf 3 process
Supported Releases 10.2.0E or later
clear ip ospf statistics
Clears OSPF trac statistics.
Syntax
clear ip ospf [instance-number] statistics
Parameters instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
Default Not congured
Command Mode EXEC
Usage Information This command clears the OSPF trac statistics in a specied instance or in all the congured OSPF instances, and
resets them to zero.
Layer 3 415