Reference Guide

Parameters
• vlan-id — Enter the VLAN ID.
• enode-mac-address — Enter the MAC address of ENode.
• fcf-mac-address — Enter the MAC address of FCF.
• fcoe-mac-address — Enter the MAC address of FCoE session.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear fcoe database vlan 100 enode aa:bb:cc:00:00:00
Supported Releases 10.4.0E(R1) or later
clear fcoe statistics
Clears FCoE statistics for specied interface.
Syntax
clear fcoe statistics [interface interface-type]
Parameters
interface-type — (Optional) Enter the interface type. The interface may be
ethernet, VLAN, or port-channel.
Default Not congured
Command Mode EXEC
Usage Information If you do not specify the interface interface-type information, then the command clears the statistics
for all the interfaces and VLANs.
Example
OS10# clear fcoe statistics interface ethernet 1/1/1
OS10# clear fcoe statistics interface port-channel 5
Supported Releases 10.4.0E(R1) or later
fcoe max-sessions-per-enodemac
Congures the maximum number of sessions allowed for an ENode.
Syntax
fcoe max-sessions-per-enodemac max-session-number
Parameters max-session-number — Enter the maximum number of sessions to be allowed, ranging from 1 to 64.
Defaults 32
Command Mode CONFIGURATION
Usage Information
The no version of this command resets the number of sessions to the default value.
Example
OS10(config)# fcoe max-sessions-per-enodemac 64
Supported Releases 10.4.0E(R1) or later
Fibre Channel 147