Deployment Guide

59 VCF on VxRail Multirack Deployment using BGP EVPN
A Validated components
A.1 Dell EMC PowerSwitch models
Switches and operating system versions
Qty
Item
Version
4
Dell EMC PowerSwitch S5248F-ON leaf switches
10.4.3.5
2
Dell EMC PowerSwitch Z9264F-ON spine switches
10.4.3.5
2
Dell EMC PowerSwitch S3048-ON OOB mgmt switches
10.4.3.5
A.2 VxRail E560 nodes
A cluster of four VxRail E560 nodes was used to validate the VI-WLD in this guide. The nodes were each
configured using the information that is provided in Table 19. The values in Table 19 can also be found in the
VxRail Support Matrix.
VxRail node components
Qty per node
Item
Firmware version
2
Intel Xeon Gold 6136 CPU @ 3.00GHz, 12 cores
-
12
16GB DDR4 DIMMs (192GB total)
-
2
800GB SAS SSD
-
8
1.2TB SAS HDD
EF03
1
Dell HBA330 Storage Controller
15.17.09.06
1
Boot Optimized Storage Solution (BOSS)
Controller w/ 2x240GB SATA SSDs
2.5.13.3016
1
Broadcom 57414 NDC – 2x25GbE SFP28 ports
21.40.22.21
1
Broadcom 57414 NIC – 2x25GbE SFP29 ports
21.40.22.21
-
BIOS
2.1.8
-
iDRAC with Lifecycle Controller
3.32.32.32
Note: For information on the management world load components see the deployment guide, VCF on VxRail
multirack deploying using BGP EVPN.