Deployment Guide

52 VCF on VxRail Multirack Deployment using BGP EVPN

8.8 Add the NSX-T edge nodes to the transport zones

After you deploy the NSX-T edge nodes and join them to the management plane, to connect the nodes to the

workload domain. Next, add the nodes to the transport zones for uplink and overlay traffic and configure the

N-VDS on each edge node. Table 16 shows the values that are used for both edge nodes.

Edge node transport zone settings

Setting

Value for sfo01wesg01

Value for sfo01esg02

Transport Zones

sfo01-w-uplink01(VLAN)

sfo01-w-uplink02(VLAN)

sfo01-w-overlay(Overlay)

Table 17 shows the Edge node N-VDS settings.

Edge node N-VDS settings

Setting

Value for sfo01wesg01

Value for sfo01esg02

Edge Switch Name

sfo01-w-nvds01

Uplink Profile

sfo01-w-overlay-profile

IP Assignment

Use Static IP List

Static IP List

172.16.49.21

172.16.49.22

Gateway

172.16.49.253

Subnet Mask

255.255.255.0

Virtual NICs

fp-eth0 uplink-1