Install Guide
Table Of Contents
- Dell EMC PowerSwitch S3048-ON Installation Guide June 2021
- Contents
- About this guide
- The S3048–ON switch
- Site preparations
- NEBS compliance
- Install the S3048–ON
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE Standards
- Agency compliance
- USA Federal Communications Commission Statement
- European Union EMC Directive Conformance Statement
- Japan VCCI Compliance for Class A Equipment
- Korean Certification of Compliance
- Safety Standards and Compliance Agency Certifications
- Electromagnetic compatibility
- Product recycling and disposal
- Dell EMC support
LED behavior
The following S3048–ON switch LED behavior is seen during ONIE operations:
Figure 4. S3048–ON LEDs
1. System Status LED
2. Master LED
3. Power LED
4. Locator LED
5. Fan LED
6. Management Port LEDs
Table 1. S3048–ON LED behavior
LED Description
System Status/Health LED
● Solid green—Normal operation
● Blinking green—Booting
● Solid yellow—Critical system error
● Blinking yellow—Non-critical system error, fan failure, or
power supply failure
Power LED
● Off—No power
● Solid Green—Normal
● Solid yellow—POST is in process
● Blinking yellow—Power supply failed
Master LED
● Off—Switch is in Stacking Slave mode
● Solid green—System is in Stacking Master or Standalone
mode
FAN LED
● Solid green—Fan powered and running at the expected
RPM
● Solid yellow—Fan failed including incompatible airflow
direction when you insert the PSU or fan trays with
differing airflows
LOCATOR LED
● Off—Locator function is disabled
● Blinking blue—Locator function is enabled
8 The S3048–ON switch