Install Guide
Table Of Contents
- Dell EMC PowerSwitch S3048-ON Installation Guide June 2021
- Contents
- About this guide
- The S3048–ON switch
- Site preparations
- NEBS compliance
- Install the S3048–ON
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE Standards
- Agency compliance
- USA Federal Communications Commission Statement
- European Union EMC Directive Conformance Statement
- Japan VCCI Compliance for Class A Equipment
- Korean Certification of Compliance
- Safety Standards and Compliance Agency Certifications
- Electromagnetic compatibility
- Product recycling and disposal
- Dell EMC support
Features
The S3048–ON offers the following features.
● Forty-eight 10/100/1000Base-T RJ-45 ports
● Four SFP+ 10G ports
● One serial console port
● One universal serial bus 2.0 (USB Type-A) port for additional file storage
● One management port
● Rangeley Central processing unit (CPU) system with 2GB DDR III RAM.
●
Temperature monitoring
● Software-readable thermal monitor
● Real time clock (RTC) support
● Hot-plug redundant power supply
● Power management monitoring
● Removable fans
● Standard 1U chassis
Physical dimensions
The S3048-ON has the following physical dimensions:
● 434 x 320 x 44 mm (W x D x H)
● 17.09 x 12.60 x 1.73 inches (W x D x H)
Switch status
You can view S3048–ON status information using the LEDs.
LED display
The S3048–ON includes LED displays on the I/O side of the switch. This section describes open networking installation
environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.
The S3048–ON switch
7