Administrator Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Usage Information
NOTE: A filepath that contains a dot ( . ) is not supported.
show running-config
Display the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one of the
following keywords:
NOTE: If you did not configure anything that entity, nothing displays and the
prompt returns.
aaa
for the current AAA configuration
acl
for the current ACL configuration
arp
for the current static ARP configuration
as-path
for the current AS-path configuration
bfd
for the current BFD configuration
bgp
for the current BGP configuration
boot
for the current boot configuration
cam-profile
for the current CAM profile in the configuration
class-map
for the current class-map configuration
community-list
for the current community-list configuration
74 File Management