Administrator Guide

rename
Rename a file in the local file system.
Syntax
rename url url
Parameters
url Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// followed by the filename.
• For a file on an NFS mounted file system, enter nfsmount:// followed by the
mount point and file path.
• For a file on an external USB drive, enter usbflash:// followed by the filename.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON. Added support for NFS mount.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on S-Series
7.5.1.0 Introduced on C-Series
E-Series Original command
restore factory-defaults
Restore factory defaults.
Syntax
restore factory-defaults stack-unit {stack—unit—number | all} {clear-all |
bootvar | nvram}
Parameters
factory-defaults Return the system to its factory default mode.
stack-unit-number Enter the stack member unit identifier to restore only the mentioned stack-unit. The
range is from 1 to 6.
all Enter the keyword all to restore all units in the stack.
bootvar Enter the keyword bootvar to reset boot line.
clear-all Enter the keywords clear-all to reset the NvRAM, boot environment variables, and
the system startup configuration.
nvram Enter the keyword nvram to reset the NvRAM only.
68 File Management