Administrator Guide

show interfaces eee statistics
Display the statistical details of Energy Efficient Ethernet (EEE).
Syntax
show interfaces [interface-type [slot/port | slot/port-range]] eee statistics
Parameters
interface-type Enter the interface information as GigabitEthernet or TenGigabitEthernet
followed by the slot and the port number or range of port numbers.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S3048–ON.
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage Information
The show interfaces eee statistics command displays the statistics of Energy Efficient Ethernet
(EEE) on all interfaces.
Use the show interfaces interface-type slot/port eee statistics command to view the
statistics of EEE on the specified port.
Use the show interfaces interface-type slot/port-range eee statistics command to
view the statistics of EEE on the specified range of ports..
Example
Example for all the interfaces
Example for a specific interface
Related
Commands
• show interfaces — display information on a specific physical interface or virtual interface.
show interfaces phy
Display auto-negotiation and link partner information.
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
gigabitethernet Enter the keyword gigabitethernet then the slot/port information.
tengigabitetherne
t
Enter the keyword tengigabitethernet then the slot or port information.
NOTE: This command also enables you to view information corresponding to
a range of ports. However, for Open Networking (ON) platforms the
notation for specifying port range in the command is different from how you
specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range. For
example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as
show interfaces interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport] -
slot/port/[subport]. For example, if you want to display information
corresponding to all ports between 1 and 4, specify the port range as
show
interfaces interface-type 1/1/1 - 1/1/4.
Command Modes
• EXEC
• EXEC Privilege
Interfaces 637