Administrator Guide

interface range macro name
Run the interface-range macro to automatically configure the pre-defined range of interfaces.
Syntax
interface range macro name
Parameters
name Enter the name of an existing macro.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced
Example (Single
Range)
This example shows the macro named test that was defined earlier.
DellEMC(config)# interface range macro test
DellEMC(config-if-range-gi-1/1-3,gi-5/1-47,gi-2/1-89)#
Dell
Related
Commands
• interface range — configure a range of command (bulk configuration).
• interface range macro (define) — define a macro for an interface range (bulk configuration).
interface vlan
Configure a VLAN. You can configure up to 4094 VLANs.
Syntax
interface vlan vlan-id [of-instance{of-id}]
Parameters
vlan-id Enter a number as the VLAN Identifier. The range is from 1 to 4094.
of-instance{ of-id } Enter the keyword of-instance then the OpenFlow instance ID to add the VLAN to the
specified OpenFlow instance. The range is from 1 to 8.
Interfaces 611