Administrator Guide

NOTE: The access list name is truncated.
DellEMC# show acl-vlan-group TestGroupSeventeenTwenty
Group Name Egress IP Acl Ingress IP Acl Ingress IPV6
Acl Vlan Members Test -
test - 1-100
The following sample output shows the line-by-line style display when using the show acl-vlan-group
detail option.
NOTE: No group or access list names are truncated
DellEMC# show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the system to enable the settings
to be stored in nonvolatile storage. During the initialization of CAM, the chassis manager reads the NVRAM and
allocates the dynamic VCAP regions.
The following table describes the output fields of this show command:
Field Description
Chassis Vlan Cam
ACL
Details about the CAM blocks allocated for ACLs for various VLAN operations at a
system-wide, global level.
Stack Unit
<number>
Details about the CAM blocks allocated for ACLs for various VLAN operations for a
particular stack unit.
Current
Settings(in block
sizes)
Information about the number of FP blocks that are currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open flow operations.
VlanIscsi Number of FP blocks for VLAN internet small computer system interface (iSCSI)
counters.
306 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)