Users Guide

service simple-password
Disables the strong password check congured with username password role and password-attributes commands.
Syntax
service simple-password
Parameters None
Default Not congured
Command Mode CONFIGURATION
Usage Information Use the service simple-password command to turn o the strong password checks so that you can
congure passwords with no restrictions.
To revert to the congured stronger password settings, use the no service simple-password command.
Example
OS10(config)# service simple-password
Supported Releases 10.5.0.0 or later
show boot protect
Displays the current list of congured users that have access to bootloader protection.
Syntax
show boot protect
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
Displays the current list of authorised users for bootloader protection, but hides their passwords for security
reasons.
Example (Disabled)
OS10# show boot protect
Boot protection disabled
Example (Enabled)
OS10# show boot protect
Boot protection enabled
Authorized users: root linuxadmin admin
Supported Releases 10.4.3.0 or later
show crypto ssh-key
Displays the current host public keys used in SSH authentication.
Syntax
show crypto ssh-key {rsa | ecdsa | ed25119}
Parameters
• rsa — Displays the RSA public key.
• ecdsa — Displays the ECDSA public key.
964 Security