Users Guide

Usage Information Use this command to view the IPv4 static and connected routes congured for the Management port. Use the
management route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported Releases 10.2.2E or later
show ipv6 management-route
Displays the IPv6 routes used to access the Management port.
Syntax
show ipv6 management-route [all | connected | summary]
Parameters
• all — (Optional) Display the IPv6 routes that the Management port uses.
• connected — (Optional) Display only routes directly connected to the Management port.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active Management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv6 static and connected routes congured for the Management port. Use the
management route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ipv6 management-route
Destination Gateway State
----------- ------- -----
2001:34::0/64 ManagementEthernet 1/1 Connected
2001:68::0/64 2001:34::16 Active
Supported Releases 10.2.2E or later
show license status
Displays license status information.
Syntax
show license status
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use the show license status command to verify the current license for running OS10, its duration, and the
service tag assigned to the switch.
Example
OS10# show license status
System Information
---------------------------------------------------------
CLI Basics 77