Users Guide

• TOS—Displays the ToS options. The only option available is zero.
• Metric—Displays the LSA metric.
Example
OS10# show ip ospf 10 database summary
OSPF Router with ID (111.2.1.1) (Process ID 10)
Summary Network (Area 0.0.0.0)
LS age: 623
Options: (No TOS-capability, No DC)
C: Summary Network
Link State ID: 115.1.1.0
Advertising Router: 111.111.111.1
LS Seq Number: 0x800001e8
Checksum: 0x4a67
Length: 28
Network Mask: /24
TOS: 0 Metric: 0
Supported Releases 10.2.0E or later
show ip ospf interface
Displays the congured OSPF interfaces. You must enable OSPF to display output.
Syntax
show ip ospf interface [process-id] [vrf vrf-name] interface or show ip ospf
[process-id] [vrf vrf-name] interface [interface]
Parameters
• process-id — (Optional) Displays information for an OSPF process ID. If you do not enter a process ID, this
command applies only to the rst OSPF process.
• vrf vrf-name — (Optional) Displays information for an OSPF instance corresponding to a VRF.
• interface — (Optional) Enter the interface information:
– ethernet — Enter the Ethernet interface information, from 1 to 48.
– port channel — Enter the port-channel interface number, from 1 to 128.
– vlan — Enter the VLAN interface number, from 1 to 4093.
Default Not congured
Command Mode EXEC
Example
OS10# show ip ospf 10 interface
ethernet1/1/1 is up, line protocol is up
Internet Address 110.1.1.1/24, Area 0.0.0.0
Process ID 10, Router ID 1.1.1.1, Network Type broadcast, Cost: 10
Transmit Delay is 1 sec, State WAIT, Priority 1
BFD enabled(Interface level) Interval 300 Min_rx 300 Multiplier 3 Role Active
Designated Router (ID) , Interface address 0.0.0.0
Backup Designated router (ID) , Interface address 0.0.0.0
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Neighbor Count is 0, Adjacent neighbor count is 0
Supported Releases 10.2.0E or later
show ip ospf routes
Displays OSPF routes received from neighbors along with parameters such as cost, next-hop, area, interface, and type of route.
Syntax
show ip ospf [process-id] [vrf vrf-name] routes [prefix IP-prefix]
634 Layer 3