Users Guide

For example, enter
ONIE:/ # onie-nos-install ftp://a.b.c.d/PKGS_OS10–Enterprise-x.x.xx.bin
Where a.b.c.d represents the location to download the image le from, and x.x.xx represents the version number of the software to
install.
The OS10 installer image creates several partitions, including OS10-A and OS10-B. After installation completes, the switch automatically
reboots and loads OS10 from OS10-A, which becomes the active partition by default. OS10-B becomes the standby partition.
Install manually using a USB drive
You can manually install the OS10 software image using a USB device. Verify that the USB device supports a FAT or EXT2 le system. For
instructions to format a USB device in FAT or EXT2 format, see the accompanying Windows documentation for FAT formatting or Linux
documentation for FAT or EXT2 formatting.
1 Plug the USB storage device into the USB storage port on the switch.
2 Power up the switch to automatically boot using the ONIE: Rescue option.
3 (Optional) Stop ONIE discovery if the device boots to ONIE: Install.
$ onie-discovery-stop
4 Create a USB mount location on the system.
$ mkdir /mnt/media
5 Identify the path to the USB drive.
$ fdisk -l
6 Mount the USB media plugged in the USB port on the device.
$ mount -t vfat usb-drive-path /mnt/media
7 Install the software from the USB, where /mnt/media species the path where the USB partition is mounted.
$ onie-nos-install /mnt/media/image_file
The ONIE auto-discovery process discovers the image le at the specied USB path, loads the software image, and reboots the switch.
For more information, see the ONIE User Guide.
Log in
Connect a terminal emulator to the console serial port on the switch using a serial cable. Serial port settings are 115200 baud rate, 8 data
bits, and no parity.
To log in to an OS10 switch, power up and wait for the system to perform a power-on self-test (POST). Enter admin for both the default
user name and user password.
Change the default admin password after the rst OS10 login. The system saves the new password for future logins. After you change the
password through the CLI, use the
write memory command to save the conguration. For example:
OS10 login: admin
Password: admin
Last login: Sat Oct 6 00:25:33 UTC 2018 on ttyS0
Linux OS10 4.9.110 #1 SMP Debian 4.9.110-3+deb9u4 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-* Dell EMC Network Operating System (OS10) *-
46
Getting Started