Users Guide

ip
Congures the IP time-to-live (TTL) value and the dierentiated services code point (DSCP) value for the ERPM trac.
Syntax
ip {ttl ttl-number | dscp dscp-number}
Parameters
• ttl-number — Enter the TTL value, from 1 to 255.
• dscp-number — Enter the DSCP value, from 0 to 63.
Default
• TTL: 255
• DSCP: 0
Command Mode MONITOR-SESSION (ERPM)
Usage Information The no version of this command removes the congured TTL and DSCP values.
Example
OS10(conf-mon-erpm-source-10)# ip ttl 16
OS10(conf-mon-erpm-source-10)# ip DSCP 63
Supported Releases 10.4.0E(R1) or later
monitor session
Creates a session for monitoring trac with port monitoring.
Syntax
monitor session session-id type [local | rpm-source | erpm-source]
Parameters
• session-id — Enter a monitor session ID, from 1 to 18.
• local — (Optional) Enter a local monitoring session.
• rpm-source — (Optional) Enter a remote monitoring session.
• erpm-source — (Optional) Enter an encapsulated remote monitoring session.
Default local
Command Mode CONFIGURATION
Usage Information The no version of this command removes the monitor session.
Example
OS10(config)# monitor session 1
OS10(conf-mon-local-1)#
Example (RPM)
OS10(config)# monitor session 5 type rpm-source
OS10(conf-mon-rpm-source-5)#
Example (ERPM)
OS10(config)# monitor session 10 type erpm-source
OS10(conf-mon-erpm-source-10)#
Supported Releases 10.2.0E or later
450 Layer 2