Users Guide

Table Of Contents
VLAN Name(s):
VLAN NAME
---------------------
1 vlan1
2 vlan2
4 vlan4
5 vlan5
6 vlan6
7 vlan7
8 vlan8
9 vlan9
Maximum size of LLDP PDU: 1500
Current LLDP PDU Size: 386
LLDP PDU Truncated(Too many TLV's): false
LLDP MED Capabilities:
Supported:
LLDP-MED Capabilities,
Network Policy,
Inventory Management
Current:
LLDP-MED Capabilities,
Network Policy
LLDP MED Device Type: Network connectivity
Network policy advertisement
LLDP-MED is enabled on all interfaces by default. Congure OS10 to advertise LLDP-MED TLVs from congured interfaces. Dene LLDP-
MED network policies before applying the policies to an interface. Attach only one network policy per interface.
Dene an LLDP-MED network-policy on an interface in CONFIGURATION mode.
lldp-med network-policy {add | remove} number
add — Attach the network policy to an interface.
remove — Remove the network policy from an interface.
number — Enter a network policy index number, from 1 to 32.
Congure advertise LLDP-MED network policies
OS10(conf-if-eth1/1/5)# lldp-med network-policy add 1
Fast start repeat count
Fast start repeat count enables a network-connectivity device to advertise itself at a faster rate for a limited amount of time. The fast start
timer starts when a network-connectivity device receives the rst LLDP frame from a newly detected endpoint.
When an LLDP-MED endpoint is newly detected or connected to the network, the lldp-med fast-start-repeat-count
command enables the network to quickly detect the endpoint. The LLDP-MED fast start repeat count species the number of LLDP
packets that send during the LLDP-MED fast start period. By default, the device sends three packets per interval. Change the number of
packets a device sends per second a maximum of 10.
Rapid availability is crucial for applications such as emergency call service location (E911).
Enable fast start repeat count which is the number of packets sent during activation in CONFIGURATION mode, from 1 to 10, default 3.
lldp-med fast-start-repeat-count number
Congure fast start repeat count
OS10(config)# lldp med fast-start-repeat-count 5
374
Layer 2