Users Guide

image cancel
Cancels an image or rmware le download that is in progress.
Syntax
image cancel
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The image cancel command cancels a le download from a server, such as an OS10 binary image or rmware
upgrade, that is in progress. After an image download completes, the command has no eect. The command also
removes any pending rmware upgrades on the switch.
Example
OS10# image cancel
Supported Releases 10.2.0E or later
image copy
Copies the entire image in the active partition to the standby partition, a mirror image.
Syntax
image copy active-to-standby
Parameters active-to-standby — Enter to copy the entire image in the active partition to the standby partition, a mirror
image.
Default Not congured
Command Mode EXEC
Usage Information Duplicate the active, running software image to the standby image location.
Example
OS10# image copy active-to-standby
Supported Releases 10.2.0E or later
image download
Downloads a new software image or rmware le to the local le system.
Syntax
image download file-url
Parameters file-url — Enter the URL of the image le:
• ftp://userid:passwd@hostip:/filepath — Enter the path to copy from the remote FTP server.
• http[s]://hostip:/filepath — Enter the path to copy from the remote HTTP or HTTPS server.
• scp://userid:passwd@hostip:/filepath — Enter the path to copy from the remote SCP le
system.
• sftp://userid:passwd@hostip:/filepath — Enter the path to copy from the remote SFTP le
system.
• tftp://hostip:/filepath — Enter the path to copy from the remote TFTP le system.
• usb://filepath — Enter the path to copy from the USB le system.
Default Not congured
Command Mode EXEC
Getting Started 37