Users Guide

TLV Subtype Description
provides the aggregated port identier if the
link is aggregated.
Port VLAN ID 1 Untagged VLAN to which a port belongs.
Protocol identity 4 Not supported.
Table 17. 802.3 organizationally-specic TLVs (Type – 127, OUI – 00-12-0F)
TLV Subtype Description
MAC/PHY conguration/status 1 Indicates duplex and bit rate capability and
the current duplex and bit rate settings of
the sending device. Also indicates whether
the current settings are due to auto-
negotiation or manual conguration.
Power via MDI 2 Not supported.
Maximum frame size 4 Maximum frame size capability of the MAC
and PHY.
Table 18. iDRAC organizationally-specic TLVs; Subtypes used in iDRAC custom TLVs (Type – 127, OUI – 0xF8-0xB1-0x56)
TLV Subtype Description
Originator 1 Indicates the iDRAC string that is used as
originator. This string enables external
switches to easily identify iDRAC LLDP
PDUs.
Port type 2 Following are the applicable port types:
1 iDRAC port (dedicated)
2 NIC port
3 iDRAC and NIC port (shared)
Port FQDD 3 Port number that uniquely identies a NIC
port within a server.
Server service tag 4 Service tag ID of the server.
Server model name 5 Model name of the server. For example,
PowerEdge FC640.
Server slot number 6 Slot number of the server. For example, 1, 2,
3, 1a, 1b, and so on.
Chassis service tag 7 Service tag ID of the chassis. (Applicable
only to blade servers.)
Chassis model 8 Model name of the chassis. (Applicable only
to blade servers.)
IOM service tag 9 Service tag ID of the IOM device.
(Applicable only to blade servers.)
IOM model name 10 Model name of the IOM device. (Applicable
only to blade servers.)
364 Layer 2