Users Guide

Queuing strategy: fifo
Input statistics:
0 packets, 0 octets
Output statistics:
0 packets, 0 octets
Time since last interface status change: 00:05:15
Supported Releases 10.2.0E or later
show interface transceiver “Tunable wavelength”
Display the congured wavelength value of the optical interface.
Syntax
show interface phy-eth interface transceiver | grep “Tunable wavelength”
Parameters interface — Specify the interface corresponding to which you want to view the optical wavelength details.
Defaults None.
Command Mode EXEC PRIVILEGE
Usage Information None.
Example
OS10# show interface phy-eth 1/1/14 transceiver | grep "Tunable wavelength"
SFP1/1/14 Tunable wavelength= 1530.000nm
Supported Releases 10.4.2E or later
show inventory media
Displays installed media in switch ports.
Syntax
show inventory media
Parameters None
Command Mode EXEC
Usage Information Use the show inventory media command to verify the media type inserted in a port.
Example
OS10# show inventory media
-------------------------------------------------------------------
System Inventory Media
-------------------------------------------------------------------
Node/Slot/Port Category Media Serial Dell EMC
Number Qualified
-------------------------------------------------------------------
1/1/1 Not Present
1/1/2 SFP+ SFP+ 10GBASE SR AM70843 true
1/1/3 Not Present
1/1/4 SFP+ SFP+ 10GBASE SR AKN0LC7 false
1/1/5 SFP+ SFP+ 10GBASE SR AM718GQ true
1/1/6 SFP+ SFP+ 10GBASE SR AM708XM true
1/1/7 SFP+ SFP+ 10GBASE SR AQ2237K true
1/1/8 SFP+ SFP+ 10GBASE SR AGT047N true
1/1/9 Not Present
1/1/10 Not Present
1/1/11 Not Present
1/1/12 Not Present
1/1/13 Not Present
1/1/14 Not Present
Interfaces 257