Users Guide

ip domain-list
Adds a domain name to the DNS list.
Syntax
ip domain-list [vrf vrf-name] [server-name] name
Parameters
• vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to add a domain name to the DNS
list corresponding to that VRF.
• server-name — (Optional) Enter the server name to add a domain name to the DNS list.
• name — Enter the name of the domain to append to the DNS list.
Default Not congured
Command Mode CONFIGURATION
Usage Information There is a maximum of six domain names in the DNS list. Use the ip domain-list command to congure a
domain name to complete unqualied host names. The domain name appends to incomplete host names in DNS
requests. The no version of this command removes a domain name from the DNS list.
Example
OS10(config)# ip domain-list jay dell.com
Supported Releases 10.2.0E or later
ip domain-name
Congures the default domain and appends to incomplete DNS requests.
Syntax
ip domain-name [vrf vrf-name] server-name
Parameters
• vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to congure the domain
corresponding to that VRF.
• server-name — (Optional) Enter the server name the default domain uses.
Default Not congured
Command Mode CONFIGURATION
Usage Information This domain appends to incomplete DNS requests. The no version of this command returns the value to the
default.
Example
OS10(config)# ip domain-name jay dell.com
Supported Releases 10.2.0E or later
ip host
Congures mapping between the host name server and the IP address.
Syntax
ip host [vrf vrf-name] [host-name] address
Parameters
• vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to congure the name server to IP
address mapping for that VRF.
System management 199