Users Guide

• minutes — Enter the minute oset from UTC, ranging from 0 to 59.
Default Not congured
Command Mode
• CONFIGURATION
Usage Information The standard time zone option applies the predened oset for the selected standard time zone, including DST
changes that apply to the local time. After you congure this command, OS10 uses the updated local time in all
logs and timestamps. You can use the ? character or press the tab key for command completion and view a list of
supported standard time zones. To view a list of supported standard time zone names, see the Time zones and
UTC oset reference section. Dene region names with a "/" at the end of the string. The "/" character indicates
that a time zone string follows the region name. For example, "Asia/Calcutta." The no form of the command resets
the local time to UTC.
Example
OS10(config)# clock timezone standard-timezone Brazil/West
Supported Releases 10.3.0E or later
show clock
Displays the current system clock settings.
Syntax
show clock
Parameters None
Default Not congured
Command Mode
• EXEC
Usage Information The universal time coordinated (UTC) value is the number of hours that your time zone is later or earlier than UTC/
Greenwich mean time.
Example
OS10# show clock
2017-01-25T11:00:31.68-08:00
Supported Releases 10.2.1E or later
show clock timezone
Displays the time zone that is congured in the system.
Syntax
show clock timezone
Parameters None
Default Etc/UTC
Command Mode
• EXEC
Usage Information None
Example
OS10# show clock timezone
Brazil/West (-04, -0400)
System management 149