Users Guide

Example
OS10(config)# logging log-file disable
Example (Enable)
OS10(config)# logging log-file enable
Example (Severity)
OS10(config)# logging log-file severity log-notice
Supported Releases 10.2.0E or later
logging monitor
Set the minimum severity level for logging to the terminal lines.
Syntax
logging monitor severity severity-level
Parameters severity-level — Set the minimum logging severity level:
• log-emerg — Set the system as unusable.
• log-alert — Set to immediate action is needed.
• log-crit — Set to critical conditions.
• log-err — Set to error conditions.
• log-warning — Set to warning conditions.
• log-notice — Set to normal but signicant conditions, the default.
• log-info — Set to informational messages.
• log-debug — Set to debug messages.
Default Log-notice
Command Mode
• CONFIGURATION
Usage Information
To reset the monitor severity to the default level, use the no logging monitor severity command. The
default severity level is log-notice.
Example
OS10(config)# logging monitor severity log-info
Supported Releases 10.2.0E or later
logging security-prole
Creates a TLS security prole for system logging.
Syntax
logging security-profile profile-name
Parameters prole-name — Enter the name of the Syslog over TLS security prole created with the crypto security-
profile profile-name command; a maximum of 32 characters.
Default Not congured
Command mode
• CONFIGURATION
1368 Troubleshoot OS10