Users Guide

event severity-prole
Congures a severity prole to change the severity of events, or turn o event notications.
Syntax
event severity-profile {default | profile-name}
Parameters profile-name—Name of the custom severity prole, a maximum of 64 characters. The le extension, .xml is
optional.
Default Default.xml
Command Mode EXEC
Usage Information Congures a severity prole to change the characteristics of events. If you congure a custom prole, the prole
applies on top of the default prole. Restart the system for the changes to take eect. The system restart ensures
that the existing stateful events are tagged appropriately based on the newly applied severity prole. Severity
proles are stored in the severity-prole:// partition. This partition includes a factory default severity prole,
default.xml. You cannot edit or delete the default and active severity proles.
Example
OS10# event severity-profile MySevPro_1
%Notice: Severity profile will be active after system restart
Supported Releases 10.5.0.0 or later
show alarms
Displays all current active alarms in the system.
Syntax
show alarms
Parameters None
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show alarms
Sq No Severity Name
Timestamp Source
----- -------- ------------------------------
--------------------------- ------
7563 critical EQM_MORE_PSU_FAULT Fri Jul 26 19:26:16
2019 /pus/1
7566 warning EQM_TML_MINOR_CROSSED Fri Jul 26 19:30:22
2019 /pus/1
7569 information L2_SERV_LACP_CMS_CPS_SEND_FAIL Fri Jul 26 19:55:40
2019 /pus/1
Supported Releases 10.2.0E or later
show alarms acknowledged
Displays all acknowledged alarms.
Syntax
show alarms acknowledged
1360 Troubleshoot OS10