Users Guide

server url
Congures the URL and port of the SupportAssist server and species the username and password that is required for SupportAssist
server authorization.
Syntax
server url {default | server-url-string} username username password password
Parameters
• default—Enter default to connect to the SupportAssist server (https://esrs3.emc.com).
• server-url-string—Enter the domain name or IP address of the SupportAssist server.
• username—Enter the username to establish connectivity with the SupportAssist server.
• password—Enter the password to establish connectivity with the SupportAssist server.
Default None
Command Mode
• SUPPORT-ASSIST
Usage Information Enter your Dell Digital Locker (DDL) credentials. This account must have entitlements to the OS10 switch in DDL.
Only congure one SupportAssist server. Use the show support-assist status command to view the
server conguration. The no version of this command removes the conguration.
Example
OS10(conf-support-assist)# server url default username [e-mail]
password Password1
Supported Releases 10.2.0E or later
show conguration
Displays the SupportAssist conguration currently running on the device.
Syntax
show configuration
Parameters None
Default Not congured
Command Mode
• SUPPORT-ASSIST
Usage Information None
Example
OS10(conf-support-assist)# show configuration
!
support-assist
server url https://esrs3stg.emc.com username example-username password 9
76dbcf6c
ce4bd298375e15bb989a9a6e6ee51d130d446ce3c25ade72a6f99fc6
source-interface mgmt1/1/1
!
contact-company name "Example Company Name"
street-address No:123 Example Street Bldg 999
address city San Jose state California country USA zipcode 95125
territory Global
!
contact-person first Firstname last Lastname
email-address primary [e-mail] alternate [e-mail]
phone primary 0001234567 alternate 1234567890
preferred-method email
1344 Troubleshoot OS10