Users Guide

location-led interface
Changes the location LED of the interface.
Syntax
location-led interface ethernet {chassis/slot/port[:subport]} {on | off}
Parameters
• chassis/slot/port[:subport] — Enter the ethernet interface number.
• on | off — Set the interface LED to be on or o.
Default Not congured
Command Mode EXEC
Usage Information Use this command to change the location LED for the specied interface.
Example
OS10# location-led interface ethernet 1/1/1 on
OS10# location-led interface ethernet 1/1/1 off
Supported Releases 10.3.0E or later
location-led system
Changes the location LED of the system.
Syntax
location-led system {node-id | node-id/unit-id} {on | off}
Parameters
• node-id | node-id/unit-id — Enter the system ID.
• on | off — Set the system LED to be on or o.
Default Not congured
Command Mode EXEC
Usage Information Use this command to change the location LED for the specied system ID.
Example
OS10# location-led system 1 on
OS10# location-led system 1 off
Supported Releases 10.3.0E or later
show boot
Displays boot partition-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not congured
Command Mode EXEC
Usage Information Use the boot system command to set the boot partition for the next reboot.
Example
OS10# show boot
Current system image information:
Troubleshoot OS10 1319