Users Guide

Parameter domain-id — Enter a VLT domain ID, from 1 to 255.
Default Not congured
Command Mode EXEC
Usage Information In the following example, the status of the VLT node should be up. If you see the role for this VLT node listed as
primary, the role on the peer node should be listed as secondary.
Example
OS10# show vlt 255
Domain ID : 255
Unit ID : 1
Role : primary
Version : 2.0
Local System MAC address : 34:17:eb:3a:bd:80
Role priority : 1
VLT MAC address : aa:bb:cc:dd:ee:ff
IP address : fda5:74c8:b79e:1::1
Delay-Restore timer : 100 seconds
Peer-Routing : Enabled
Peer-Routing-Timeout timer : 9999 seconds
VLTi Link Status
port-channel1000 : up
VLT Peer Unit ID System MAC Address Status IP Address Version
----------------------------------------------------------------------------------
2 34:17:eb:3a:c2:80 up fda5:74c8:b79e:1::2 2.0
Supported Releases 10.2.0E or later
show vlt backup-link
Displays detailed status of the heartbeat
Syntax
show vlt domain-id backup-link
Parameters domain-id — Enter the VLT domain ID.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show vlt 255 backup-link
VLT Backup Link
------------------------
Destination : 10.16.208.164
Peer Heartbeat status : Up
Heartbeat interval : 1
Heartbeat timeout : 3
Supported Releases 10.3.1E or later
show vlt mac-inconsistency
Displays inconsistencies in dynamic MAC addresses learned between VLT peers across spanned-VLANs.
Syntax
show vlt mac-inconsistency
Parameters None
Virtual Link Trunking 1221