Users Guide

Congure SNMPv3 users
OS10(config)# snmp-server user privuser v3group 3 encrypted auth
md59fc53d9d908118b2804fe80e3ba8763d priv des56 d0452401a8c3ce42804fe80e3ba8763d
OS10(config)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth md5
authpasswd
Display SNMP users
OS10# show snmp user
User name : privuser
Group : v3group
Version : 3
Authentication Protocol : MD5
Privacy Protocol : AES
SNMP commands
show snmp community
Displays the SNMP communities congured on the switch.
Syntax
show snmp community
Parameters None
Defaults None
Command Mode EXEC
Usage Information To congure an SNMP community, use the snmp-server community command.
Example
OS10# show snmp community
Community : public
Access : read-only
Community : dellOS10
Access : read-write
ACL : dellacl
Supported Releases 10.4.2.0 or later
show snmp engineID
Displays the SNMP engine ID on the switch or on remote devices that access the SNMP agent on the switch.
Syntax
show snmp engineID {local | remote}
Parameters
• local — Display the local engine ID.
• remote — Display the SNMP engine ID of remote devices congured on the switch.
Defaults None
Command Mode EXEC
Usage Information To congure the local engine ID or the engine ID for a remote device, use the snmp-server engineID
command.
System management 121