Users Guide

Command Mode EXEC
Usage Information When BST is enabled, if you make any conguration changes that aect the priority group or priority mapping
conguration, such as removal of class map, addition of class map to policy map (nqos), and so on, be sure to clear
the buer statistics using the clear qos statistics type buffer-statistics-tracking
command to view the actual peak buer utilization for the current conguration.
Example
OS10# show qos ingress buffer-statistics-tracking interface
ethernet 1/1/1 priority-group 0
Supported Releases 10.4.3.0 or later
show qos ingress buer-stats interface
Displays the buers statistics for the ingress interface.
Syntax
show qos ingress buffer-stats interface [interface node/slot/port[:subport]]
Parameters
• interface — (Optional) Enter the interface type.
• node/slot/port[:subport] — (Optional) Enter the port information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10(config)# show qos ingress buffer-stats interface ethernet 1/1/15
Interface : ethernet1/1/15
Speed : 10G
Priority Used reserved Used shared Used HDRM
Group buffers buffers buffers
------------------------------------------------
0 9360 681824 35984
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
Supported Releases 10.3.0E or later
show qos port-map details
Displays port to port pipe and MMU mapping.
Syntax
show qos port-map details [interface interface-type]
Parameters interface interface-type — (Optional) Enter the keyword interface and the interface type.
Default Not congured
Command Mode EXEC
1182 Quality of service