Users Guide

show qos ingress buers interface
Displays interface buer congurations.
Syntax
show qos ingress buffers interface [interface node/slot/port[:subport]]
Parameters
• interface — (Optional) Enter the interface type.
• node/slot/port[:subport] — (Optional) Enter the port information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10(config)# show qos ingress buffer interface ethernet 1/1/1
Interface ethernet 1/1/1
Speed 40G
------------------------------------------------------------------------------
PG# PRIORITIES qos ALLOTED (Kb)
group Reserved Shared buffer XOFF XON
shared buffer
id buffers MODE threshold
threshold threshold
------------------------------------------------------------------------------
0 4 4 35 DYNAMIC 9
9 8
1 3 3 35 DYNAMIC 9
9 8
2 - - 0 STATIC 0
0 0
3 - - 0 STATIC 0
0 0
4 - - 0 STATIC 0
0 0
5 - - 0 STATIC 0
0 0
6 - - 0 STATIC 0
0 0
7 - 0-2,5-7 8 STATIC 0
0 0
Supported Releases 10.3.0E or later
show qos ingress buer-statistics-tracking
Displays ingress priority group-level peak buer usage count in bytes for the given priority group on a given interface.
Syntax
show qos ingress buffer-statistics-tracking interface ethernet [node/slot/port]
[priority-group {0-7}] [detail]
Parameters
• node/slot/port—Enter the port information.
• [priority-group {0-7}]—Enter the priority-group keyword, followed by the group number.
• detail—Displays per MMU instance-level statistics in platforms with multiple MMU instances.
Default Not applicable
Quality of service 1181