Users Guide

Command Mode POLICY-MAP-CLASS-MAP
Usage Information This command supports only the qos or control-plane ingress policy type. When the class-map type is
control-plane, the qos-group corresponds to CPU queues 0 to 11. When the class-map type is qos, the qos-
group corresponds to data queues 0 to 7.
Example
OS10(conf-pmap-c-qos)# set qos-group 7
Supported Releases 10.2.0E or later
shape
Shapes the outgoing trac rate.
Syntax
shape {min {kbps | mbps | pps} min-value [burst-size]} {max {kbps | mbps | pps}
max-value [max-burst-size]}
Parameters
• min — Enter the minimum committed rate in unit in kbps, mbps, or pps.
• kbps — Enter the committed rate unit in kilobits per second, from 0 to 40000000.
• mbps — Enter the committed rate unit in megabits per second, from 0 to 40000.
• pps — Enter the committed rate unit in packets per second, from 1 to 268000000.
• burst-size — Enter the burst size in kilobytes per packet, from 0 to 10000 or 1 to 1073000.
• max — Enter the maximum peak rate in kbps, mbps, or pps.
• max-burst-size — Enter the burst size in kilobytes per packets, from 0 to 10000 or 1 to 1073000.
Default Maximum burst size is 50 kb or 200 packets
Command Mode POLICY-MAP-CLASS-MAP
Usage Information This command only supports the ingress QoS policy type. You must enter both the minimum and maximum values.
If you enter the rate value in pps, the burst provided is in packets. If you enter the rate in kbps or mbps, the burst is
provided in kb. If you enter the minimum rate in pps, you must also enter the maximum rate in pps.
Example
OS10(conf-pmap-c-que)# shape min kbps 11 max kbps 44
Supported Releases 10.2.0E or later
show class-map
Displays conguration details of all existing class-maps.
Syntax
show class-map [type {control-plane | qos | queuing | network-qos} class-map-
name]
Parameters
• type — Enter the policy-map type — qos, queuing, or control-plane.
• qos — Displays all policy-maps of qos type.
• queuing — Displays all policy-maps of queuing type.
• network-qos — Displays all policy-maps of network-qos type.
• control-plane — Displays all policy-maps of control-plane type.
• class-map-name — Displays the QoS class-map name.
1172 Quality of service