Users Guide

2 Apply the match criteria for the queue in CLASS-MAP mode.
match queue queue-number
3 Return to CONFIGURATION mode.
exit
4 Create a queuing type policy-map and congure a policy-map name in CONFIGURATION mode.
policy-map type queuing example-que-pmap-name
5 Congure a queuing class in POLICY-MAP mode.
class example-que-cmap-name
6 Assign a bandwidth percent, from 1 to 100 to nonpriority queues in POLICY-MAP-CLASS-MAP mode.
bandwidth percent value
Congure bandwidth allocation
OS10(config)# class-map type queuing example-que-cmap-name
OS10(config-cmap-queuing)# match queue 5
OS10(config-cmap-queuing)# exit
OS10(config)# policy-map type queuing example-que-pmap-name
OS10(config-pmap-queuing)# class example-que-cmap-name
OS10(config-pmap-c-que)# bandwidth percent 80
View class-map
OS10(conf-cmap-queuing)# do show class-map
Class-map (queuing): example-que-cmap-name
Match: queue 5
View policy-map
OS10(conf-pmap-c-que)# do show policy-map
Service-policy (queuing) output: example-que-pmap-name
Class-map (queuing): example-que-cmap-name
bandwidth percent 80
Strict priority queuing
OS10 uses queues for egress QoS policy types. Enable strict priority to dequeue all packets from the assigned queue before servicing any
other queues. When you assign more than one queue strict priority, the highest number queue receives the highest priority. You can
congure strict priority to any number of queues. By default, all queues schedule trac per WDRR.
Use the priority command to assign the priority to a single unicast queue—this conguration supersedes the bandwidth percent
conguration. A queue with priority enabled can starve other queues for the same egress interface.
Create class-map
1 Create a class-map and congure a name for the class-map in CONFIGURATION mode.
class-map type queuing class-map-name
2 Congure a match criteria in CLASS-MAP mode.
match queue queue-id
Dene a policy-map
1 Dene a policy-map and create a policy-map name CONFIGURATION mode.
policy-map type queuing policy-map-name
2 Create a QoS class and congure a name for the policy-map in POLICY-MAP mode.
class class-map-name
3 Set the scheduler as strict priority in POLICY-MAP-CLASS-MAP mode.
priority
Apply policy-map
1130
Quality of service