Users Guide

Table Of Contents
Usage Information None
Example
OS10# show ip prefix-list
ip prefix-list hello:
seq 10 deny 1.2.3.4/24
seq 20 permit 3.4.4.5/32
Example (IPv6)
OS10# show ipv6 prefix-list
ipv6 prefix-list hello:
seq 10 permit 1::1/64
seq 20 deny 2::2/64
Supported Releases 10.3.0E or later
show logging access-list
Displays the ACL logging threshold and interval conguration.
Syntax
show logging access-list
Parameters None
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show logging access-list
ACL Logging
Threshold : 10
Interval : 5
Supported Releases 10.4.3.0 or later
Route-map commands
continue
Congures the next sequence of the route map.
Syntax
continue seq-number
Parameters seq-number — Enter the next sequence number, from 1 to 65535.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes a match.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# continue 65535
Supported Releases 10.3.0E or later
Access Control Lists 1103