Users Guide

Congure match metric
OS10(config)# route-map hello
OS10(conf-route-map)# match metric 20
View route-map
OS10(conf-route-map)# do show route-map
route-map hello, permit, sequence 10
Match clauses:
metric 20
Change match
OS10(conf-route-map)# match metric 30
View updated route-map
OS10(conf-route-map)# do show route-map
route-map hello, permit, sequence 10
Match clauses:
metric 30
To lter the routes for redistribution, combine route-maps and IP prex lists. If the route or packet matches the congured criteria, OS10
processes the route based on the permit or deny conguration of the prex list.
When a route-map and a prex list combine:
• For a route map with the permit action:
– If a route matches a prex-list set to deny, the route is denied
– If a route matches a prex-list set to permit, the route is permitted and any set of actions apply
• For a route map with the deny action:
– If a route matches a prex-list set to deny, the route is denied
– If a route matches a prex-list set to permit, the route is permitted and any set of actions apply
View both IP prex-list and route-map conguration
OS10(conf-router-bgp-neighbor-af)# do show ip prefix-list
ip prefix-list p1:
seq 1 deny 10.1.1.0/24
seq 10 permit 0.0.0.0/0 le 32
ip prefix-list p2:
seq 1 permit 10.1.1.0/24
seq 10 permit 0.0.0.0/0 le 32
View route-map conguration
OS10(conf-router-bgp-neighbor-af)# do show route-map
route-map test1, deny, sequence 10
Match clauses:
ip address prefix-list p1
Set clauses:
route-map test2, permit, sequence 10
Match clauses:
ip address prefix-list p1
Set clauses:
route-map test3, deny, sequence 10
Match clauses:
ip address prefix-list p2
Set clauses:
route-map test4, permit, sequence 10
Match clauses:
ip address prefix-list p2
Set clauses:
1044
Access Control Lists