Administrator Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.1.(0.0) Introduced on S4810.
8.3.19.0 Introduced on the S4820T.
Usage Information
Reboot the switch after changing the parameter values for changes to take eect.
For platform-specic instructions about using this command, see the SDN section of the Dell Networking OS
Conguration Guide.
clear average-power
This CLI command helps the user reset the average power and average power start time.
Syntax
clear average-power stack-unit {stack-unit-number}
Parameters
stack-unit-number Enter the stack unit number.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(2.1P1) Introduced on all Dell Networking OS platforms
Usage Information
This command resets the average power and average power start time to the current time. Average power and
average power start time will be calculated from the reset time (i.e current time).
Example
Dell#clear average-power stack-unit 1
Proceed to clear Average power ? Confirm [yes/no]:yes
Dell#
clear line
Reset a terminal line.
Syntax
clear line {line-number | console 0 | vty number}
Parameters
line-number Enter a number for one of the 12 terminal lines on the system. The range is from 0 to 11.
aux 0 Enter the keywords aux 0 to reset the auxiliary port.
console 0 Enter the keywords console 0 to reset the console port.
vty number Enter the keyword vty then a number to clear a terminal line. The range is from 0 to 9.
92 Control and Monitoring