Administrator Guide

L2Acl : 2
Ipv4Acl : 4
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 0
Dell#
show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer 3 ACL, and IPv4Flow)
Syntax
show cam-usage [acl | router | switch]
Parameters
acl (OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM usage.
router (OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
switch (OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.11.0.0 The show cam-usage command is updated to display ECMP count information.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z9000.
Usage Information The following regions must be provided in the show cam-usage output:
• L3AclCam
• L2AclCam
• V6AclCam
The following table describes the output elds of the show cam-usage command.
478 Content Addressable Memory (CAM)