Administrator Guide
Version Description
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
• match interface — redistribute routes that match the next-hop interface.
• match ip address — redistribute routes that match an IP address.
• match ip next-hop — redistribute routes that match the next-hop IP address.
• match ip route-source — redistribute routes that match routes advertised by other routers.
• match metric — redistribute routes that match a specic metric.
• match route-type — redistribute routes that match a route type.
route-map
Enable a route map statement and congure its action and sequence number. This command also places you in ROUTE-MAP mode.
Syntax
route-map map-name [permit | deny] [sequence-number]
To delete a route map, use the no route-map map-name [permit | deny] [sequence-number]
command.
Parameters
map-name Enter a text string of up to 140 characters to name the route map for easy identication.
permit (OPTIONAL) Enter the keyword permit to set the route map default as permit. If you do
not specify a keyword, the default is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map default as deny.
sequence-number (OPTIONAL) Enter a number to identify the route map for editing and sequencing with
other route maps. You are prompted for a sequence number if there are multiple instances
of the route map. The range is from 1 to 65535.
Defaults Not congured.
If you do not dene a keyword (permit or deny) for the route map, the permit action is the default.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
256 Access Control Lists (ACL)