Administrator Guide

• The order option works across ACL groups that are applied on an interface via the QoS policy framework.
• The order option takes precedence over seq sequence-number.
• If you do not congure sequence-number, the rules with the same order value are ordered according to
their conguration order.
• If you congure sequence-number, the sequence-number is used as a tie breaker for rules with the same
order.
When you use the log option, the CP processor logs details about the packets that match. Depending on how
many packets match the log entry and at what rate, the CP may become busy as it has to log these packets’
details.
If you congure the sequence-number, the sequence-number is used as a tie breaker for rules with the
same order.
NOTE: When you congure ACL logging and byte counters simultaneously, byte counters may display
an incorrect value. Congure packet counters with logging instead.
Related Commands
• deny — congure a lter to drop packets.
• permit — congure a lter to forward packets.
Common MAC Access List Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specic options.
These commands allow you to clear, display, and assign MAC ACL congurations.
The platform supports both Ingress and Egress MAC ACLs.
The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specied rules in the ACL, the trac on the
interface/ VLAN members or Port-channel members will be permitted or denied.
clear counters mac access-group
Clear counters for all or a specic MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a congured MAC access list.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
Access Control Lists (ACL) 223