Administrator Guide

Version Description
pre-6.1.1.0 Introduced on the E-Series.
Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+ password
fallback order as congured.
ip ssh pub-key-le
Specify the le used for host-based authentication.
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD Enter the le name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
This command species the le used for the host-based authentication. The creates/ le overwrites the
flash://ADMIN_DIR/ssh/knownhosts le and deletes the user-specied le. Even though this command is
a global conguration command, it does not appear in the running conguration because you only need to run this
command once.
The le contains the OpenSSH-compatible public keys of the host for which host-based authentication is allowed.
An example known host le format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
Security 1443