Administrator Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
If you enable this command, clients can log in without a password prompt. This command provides two levels of
authentication:
rhost-authentication is done with the le specied in the ip ssh rhostfile command.
checking client host-keys is done with the le specied in the ip ssh pub-key-file command.
NOTE: Administrators must specify the two les (rhosts and pub-key-file) to congure host-
based authentication.
Related Commands
ip ssh pub-key-le — public keys of trusted hosts from a le.
ip ssh rhostsle — trusted hosts and users for rhost authentication.
ip ssh key-size
Congure the size of the server-generated RSA SSHv1 key.
Syntax
ip ssh key-size 512-869
Parameters
512-869 Enter the key-size number for the server-generated RSA SSHv1 key. The range is from
512 to 869. The default is 768.
Defaults Key size 768
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
1440 Security