Administrator Guide

The following list describes output of the show qos statistics command in the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you congure trust , matched packet counters are not incremented in this
eld.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you congure trust , matched byte counters are not incremented in this
eld.
• Dropped Pkts — The total of the number of packets dropped for green, yellow and out-of-prole.
show qos wred-prole
View the WRED prole details.
Syntax
show qos wred-profile wred-profile-name
Parameters
wred-prole-name Enter the WRED prole name to view the prole details.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.12(0.0) Modied to display the global WRED state.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1300 Quality of Service (QoS)