Administrator Guide
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Available on the C-Series and S-Series.
7.5.1.0 Added support for the DSCP Marking option.
7.4.1.0 Introduced on the E-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the
match criteria.
Related Commands
• class-map — identies the class map.
match mac dot1p
Congure a match criterion for a class map based on a dot1p value.
Syntax
[seq sequence number] match mac dot1p {dot1p-list}
Parameters
seq sequence
number
(OPTIONAL) Enter the keyword seq then the sequence number. The range is from 1 to
100. By default, the sequence number are assigned in multiples of ve.
dot1p-list Enter a dot1p value. The range is from 0 to 7.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced the seq option for the class-map on all the Dell Networking OS platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Quality of Service (QoS) 1275