Users Guide

show ipv6 nd ra-guard policy
Display the congurations applied on all the RA guard policies or a specic RA guard policy.
Syntax
show ipv6 nd ra-guard policy policy-name
Parameter
policy policy-name Enter the keyword policy then the policy name. The policy name allows a maximum of
140 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Introduced on the S6000–ON, and
Z9000 switches.
Example
Dell# show ipv6 nd ra-guard policy test
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 1
match ra ipv6-access-list access
other-config-flag on
router-preference maximum medium
trusted-port
Interfaces :
Gi 1/1
Dell#
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd ra-guard policy — dene the RA guard policy name and enter the RA guard policy list conguration
mode.
• device-role — specify the role of the device attached to the port.
• hop-limit — enable the verication of the advertised hop count limit.
• mtu — set the maximum transmission unit (MTU) value.
• other-cong-ag — enable the verication of the advertised other conguration parameter.
• reachable-time — set the advertised reachability time.
• retrans-timer — set the advertised retransmission time.
• router-preference maximum — enable the verication of the advertised default router preference (DRP) value.
• trusted-port — apply the policy to trusted ports.
• ipv6 nd raguard attach-policy — apply the IPv6 RA guard to a specic interface.
978 Neighbor Discovery Protocol (NDP)