Users Guide

mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a conguration, use the no mac learning-limit station-move-violation command, then
the congured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and oending interface and
generate a syslog message.
shutdown-oending Enter the keywords shutdown-offending to shut down the oending interface and
generate a syslog message.
shutdown-original Enter the keywords shutdown-original to shut down the original interface and
generate a syslog message.
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related Commands
• show mac learning-limit — display details of the mac learning-limit.
868 Layer 2