Users Guide

vlan vlan-id Enter the keyword then the VLAN ID. The range is from 1 to 4094.
dynamic (OPTIONAL) Enter the keyword dynamic to allow aging of MACs even though a
learning limit is congured.
station-move-
violation
(OPTIONAL) Enter the keywords station-move to allow a station move on learned
MAC addresses.
Defaults
• On S-Series, the default behavior is dynamic.
NOTE: “Static” means manually entered addresses, which do not age.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Deprecated the no-station-move command (replaced by the mac-learning-
limit mac-address-sticky command).
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
8.2.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series. Added the station-move option.
6.5.1.0 Added support for MAC Learning-Limit on the LAG.
Usage Information
This command and its options are supported on physical interfaces, static LAGs, LACP LAGs, and VLANs.
If you do not specify the vlan option, the MAC address counters are not VLAN-based. That is, the sum of the
addresses learned on all VLANs (not having any learning limit conguration) is counted against the MAC learning
limit.
MAC Learning Limit violation logs and actions are not available on a per-VLAN basis.
With the keyword no-station-move option, MAC addresses learned through this feature on the selected
interface persist on a per-VLAN basis, even if received on another interface. Enabling or disabling this option has no
eect on already learned MAC addresses.
After the MAC address learning limit is reached, the MAC addresses do not age out unless you add the dynamic
option. To clear statistics on MAC address learning, use the clear counters command with the learning-limit
parameter.
Layer 2 865