Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

policy-map-

output

for the current output policy map conguration

po-failover-

group

for the current port-channel failover-group conguration

prefix-list

for the current prex-list conguration

privilege

for the current privilege conguration

qos-policy-

input

for the current input QoS policy conguration

qos-policy-

output

for the current output QoS policy conguration

radius

for the current RADIUS conguration

redirect-list

for the current redirect-list conguration

redundancy

for the current RPM redundancy conguration

resolve

for the current DNS conguration

rip

for the current RIP conguration

rmon

for the current RMON conguration

route-map

for the current route map conguration

sflow

for the current sFlow conguration

snmp

for the current SNMP conguration

spanning-tree

for the current spanning tree conguration

static

for the current static route conguration

status

for the le status information

support-

assist

for the current SupportAssist conguration

tacacs+

for the current TACACS+ conguration

tftp

for the current TFTP conguration

trace-group

for the current trace-group conguration

trace-list

for the current trace-list conguration

uplink-state-

group

for the uplink state group conguration

users

for the current users conguration

vlt

for the current VLT conguration

wred-profile

for the current wred-prole conguration

congured (OPTIONAL) Enter the keyword configuration to display line card interfaces with

non-default congurations only.

status (OPTIONAL) Enter the keyword status to display the checksum for the running

conguration and the start-up conguration.

compressed (Optional) Enter the keyword compressed to display the compressed group

conguration. Displays the compressed conguration by grouping all similar congurations.

The compression is done only for interface related congurations.

File Management 77