Users Guide

----------- ------- ----------- -----------
S 1.1.1.0/24 4.4.4.2, via Gi 1/4 1/0 00:00:01
6.6.6.2, via Gi 1/16
C 4.4.4.0/24 Direct, Gi 1/4 0/0 00:01:32
C 6.6.6.0/24 Direct, Gi 1/16 0/0 00:01:25
Dell(conf)#do show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via GigabitEthernet 1/4
* 6.6.6.2, via GigabitEthernet 1/16
Dell(conf)#
show ip route list
Display IP routes in an IP prex list.
Syntax
show ip route [vrf vrf-name] list prefix-list
Parameters
prex-list Enter the name of a congured prex list.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display IP routes in an IP
prex list corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
748 IPv4 Routing