Users Guide

Interface index is 1107525638
of-instance: 2
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related Commands
• show interfaces congured – display any interface with a non-default conguration.
• show inventory (S-Series and Z-Series) – display the S-Series and Z-Series switch types, components
(including media), Dell Networking OS version including hardware identication numbers, and congured
protocols.
• show ip interface – display Layer 3 information about the interfaces.
• show range – display all interfaces congured using the interface range command.
show interfaces congured
Display any interface with a non-default conguration.
Syntax
show interfaces configured
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
638 Interfaces